Authorised Dealer for All Telecom Products and Solutions of Panasonic Products
Provides Sales & Services to Corporates, Industries, Business Houses, Institions, Commercial Places and Home Sectors

- Fire Panels
- Smoke Detectors
- Your Safety

Ravel Fire Panels/Alarms - Systems

Ravel - RE 102 / RE 104 (2 Zone and 4 Zone Fire Panel)

Ravel Fire Panels
Fire Alarm & Safety
RE 102 / RE 104
2 Zone & 4 Zone FP

Rugged CRCA sheet with powder coated finish.
Operates on 220v, 50Hz AC supply.
Standby battery backup with built in charging.
Fire / Fault status in unambiguous colored LED indication.
Switch Mode Power Supply.
Tactile key pad for easy panel operation.
System on indication.
Main, Standby status indication.
Low Battery visual warning with audible tone.
Relay output for actuators for Fire and Fault.
Lamp Test facility.
Zone wise one man Walk Test facility.
Zone wise Isolation facility with loop voltage cut off.
Compatible to all types of conventional detectors.

Ravel - RE 2554 / 2448 (4 Zone and 8 Zone Panels)

Ravel Fire Panels
Fire Alarm & Safety
RE 102 / RE 104
2 Zone & 4 Zone FP

4 Class B initiating device circuit t (IDC).
All zones accept smoke detectors and any normally open contact device.
Any Zone can be configured as Alarm or supervisory Zone.
2 Class B Notification Appliance Circuits (NAC).
Fully complies with UL -864 and NFPA-72.
Rugged CRCA sheet with powder coated finish.
Operates on 120 - 220v 50 /60 Hz, AC Mains power supply.
Standby (battery) backup 24v DC power supply with built in charger.
16x2 Dot Matrix LCD Display.
Error free Fire / Fault status in unambiguous colored LED indication.
System ON indication.
Main, Standby status audible and visual indication.
Battery Low visual warning with audible tone.
Form-C relays for fire, faul t and supervisory.
Resettable / uninterrupted 24v D.C. Output.
RS 485 Communication facility (Optional).
Lamp Test facility.
Walk Test facility.
Zone Isolation facility with loop voltage cut off.
Earth fault annunciation facility at 0 ohm
All field wiring circuits are Power limited except 110 - 220v AC and Battery.
All field wiring circuits are supervised.
AC Low voltage cutoff.
Programmable NAC's.
Programmable IDC's.
Programmable Supervisory Mode.
Programmable AC loss delay.
Alarm verification on facility.
Programmable Trouble reminder facility.

Ravel - RE 1504 / 1508 (Semi Addressable Panel)

Ravel Fire Panels
Fire Alarm & Safety
RE 1504 / 1508
Semi Addressable Panel

As per NFPA-72 standards.
Networkable / Standalone panel.
4 Class B conventional initiating device circuit (IDC).
All zones accept smoke detectors and any normally open contact device.
Any Zone can be configured as Alarm or supervisory Zone.
Class B Notification Appliance Circuits (NAC).
Operates on 220v 50Hz, AC Mains power supply
Standby (battery) backup 24v DC power supply with built in charger.
Rugged CRCA sheet with powder coated finish.
All field wiring circuits are supervised.
AC Low voltage cutoff.
Programmable NAC.
Programmable IDCs.
Programmable AC loss delay.
Programmable Trouble reminder.
One Programmable Form-C relay for Fire / Fault / Supervisory.
2 Form-C relays for Fire.
Alarm Verification Facility. **
1000 events Log with RTC.
Error free Fire / Fault status in unambiguous colored LED indication. Main, Standby status audible and visual indication.
Battery Low visual warning with audible tone.
Zone Isolation Facility.
Ground fault annunciation facility at 0 ohms.
All field wiring circuits are Power limited except 220v A.C. and Battery.
Peer to Peer networking Facility (up to 16 panels)
Advanced features for the System Sensor series 300 detectors.
32 Detectors per Zone.
Individual detector address with location.
Detector maintenance Low / High alert.
Scan active devices facility

Ravel - RE 700 (12 Zone to 128 Zone Panels)

Ravel Fire Panels
Fire Alarm & Safety
RE 700
12 Zone to 128 Zone Panels

12 - 128 Class B initiating device circuit (IDC / Zone Circuits).
One Class B Notification Appliance Circuits (NAC / Sounder).
Fully complies with IS 2189: 1988.
Rugged CRCA sheet with powder coated finish.
20 X 4 LCD Dot Matrix Display.
Low Battery / Warning audio / Visual Display.
Operates on 220v, AC Mains power supply.
Standby (battery) back up 24v DC power supply with built in charger
Error free Fire / Fault status in unambiguous colored LED indication.
Built - in DPM (Optional)
Main, Standby status with visual/audible indication.
Battery Low visual warning with audible tone.
Event storage with RTC.
Form C relays for Fire and fault.
RS 485 and RS 232 Communication Facility.
TCP/IP (Optional) facility.
Walk Test facility.
Zone Isolation facility with loop voltage cut off.
Compatible with all types of conventional detectors, Pull Stations and any normally open contact devices.